CPAP & Ventilator, Airon, pNeuton Model S,

Description

The pNeuton Model S Ventilator with CPAP (Continuous Positive Airway Pressure) provides mask CPAP plus volume or pressure ventilation for pediatric to adult patients in pre-hospital and hospital environments. Built tough for the rigors of EMS ground and air transport.

Kit includes:
(1) pNeuton Model S
(1) DISS high pressure oxygen hose, 8 foot (2.4m), green (ISO color hose available)
(1) Model S Travel Bag
(1) Box of 58011 patient circuits – 6 foot (1.8m), large adult mask / head strap, single patient use, qty 10

UNIQUE ADVANTAGES:
-Fully pneumatic – No batteries or electricity needed
-CPAP for EMS ground and air transport
-Pediatric to adult patient support in pre-hospital and hospital settings
-Mask CPAP plus volume or pressure ventilation
-65% oxygen delivery significantly extends transport times for the most difficult patients
-MRI conditional – 3 T or less
-Small, compact, lightweight, portable
-Easy-to-use controls
-Made in Melbourne, Florida, USA

pNeuton Model S is designed for use in pre-hospital and hospital environments:
• EMS ground and air transport
• ER and trauma
• MRI
• OR
• ICU
• Intra-hospital transport

Key Features:
Versatile Respiratory Care- For early intervention, the built-in CPAP system allows you to start with face-mask CPAP and seamlessly switch to mechanical ventilation if needed without interruption. The built-in high output demand flow CPAP system with automatic sensitivity ensures critical care ventilation needs are optimized for spontaneous and mandatory breaths.

Enhanced Patient Comfort- Fully pneumatic, the pNeuton S does not require batteries or electrical power so it is always ready for operation.

Built For Transport- With simple-to-use controls – Tidal Volume, Respiratory Rate and Pressure Limit – the pNeuton S accommodates even the most challenging patients in respiratory distress.

Benefits
For the patient
• Provides invasive or non-invasive patient support
• Low patient Work of Breathing with peak flow of up to 140 L/min to meet patient needs
• 100% or 65% to match patient oxygen requirements
• Switch from mask CPAP to mechanical ventilation seamlessly and without interruption
• Low-profile, easy-seal mask reduces facial pressure

For You, the Healthcare provider
• Calibrated CPAP and oxygen controls for easy operation
• MRI conditional up to 3 T – place right next to the scanner with remote alarm output for the control room
• Manometer to monitor patient pressure and effort
• Built-in CPAP / PEEP system with automatic sensitivity for changing patient needs; no need for external CPAP valves
• Night visible pressure gauge for patient monitoring
• Monitor CO2 with invasive/non-invasive ventilation
• Oxygen powered – no batteries to change
• Rugged and lightweight (6 lbs / 2.7 kg)
• Protection for the caregiver from patient exhalation using the bacteria / viral filter

For Your budget
• Two oxygen levels; conserve oxygen with 65% setting
• 45-minute CPAP run time on a D cylinder
• Demand flow CPAP system with minimal wasted oxygen
• Economical patient circuits save on operating costs
• No batteries or electronics decrease maintenance cost

SPECIFICATIONS
• Pneumatically operated for use on pediatric and adult patients > 23 kg
• Demand flow system for spontaneous breathing to 140 L/min
• Pressures displayed on manometer
• Modes of Operation: CMV, IMV, CPAP, Pressure Limit
• Mandatory breath flow rate is fixed at 36 L/min
• MRI conditional – 3 T or less, maximum spatial gradient magnetic field of 720-gauss/cm or less, no gauss line restriction

AUDIBLE AND VISUAL ALARMS
• All pneumatic alarm system (no batteries – requires minimum 30 psi / 2 bar gas supply pressure)
• Low gas source pressure
• If source gas drops below 40 psi (2 bar)
• Continues operation as long as oxygen is available