CPAP + Ventilation, 20012 pNeu ton Model S,

Description

The pNeuton Model S Ventilator with CPAP (Continuous Positive Airway Pressure) provides mask CPAP plus volume or pressure ventilation for pediatric to adult patients in pre-hospital and hospital environments. Built tough for the rigors of EMS ground and air transport.

Kit includes:
(1) pNeuton Model S
(1) DISS high pressure oxygen hose, 8 foot (2.4m), green (ISO color hose available)
(1) Model S Travel Bag
(1) Box of 58011 patient circuits 6 foot (1.8m), large adult mask / head strap, single patient use, qty 10

UNIQUE ADVANTAGES:
-Fully pneumatic No batteries or electricity needed
-CPAP for EMS ground and air transport
-Pediatric to adult patient support in pre-hospital and hospital settings
-Mask CPAP plus volume or pressure ventilation
-65% oxygen delivery significantly extends transport times for the most difficult patients
-MRI conditional 3 T or less
-Small, compact, lightweight, portable
-Easy-to-use controls
-Made in Melbourne, Florida, USA

pNeuton Model S is designed for use in pre-hospital and hospital environments:
EMS ground and air transport
ER and trauma MRI OR ICU Intra-hospital transport

Key Features:
Versatile Respiratory Care- For early intervention, the built-in CPAP system allows you to start with face-mask CPAP and seamlessly switch to mechanical ventilation if needed without interruption. The built-in high output demand flow CPAP system with automatic sensitivity ensures critical care ventilation needs are optimized for spontaneous and mandatory breaths.

Enhanced Patient Comfort- Fully pneumatic, the pNeuton S does not require batteries or electrical power so it is always ready for operation.

Built For Transport- With simple-to-use controls Tidal Volume, Respiratory Rate and Pressure Limit the pNeuton S accommodates even the most challenging patients in respiratory distress.

Benefits
For the patient
Provides invasive or non-invasive patient support
Low patient Work of Breathing with peak flow of up to 140 L/min to meet patient needs
100% or 65% to match patient oxygen requirements
Switch from mask CPAP to mechanical ventilation seamlessly and without interruption
Low-profile, easy-seal mask reduces facial pressure

For You, the Healthcare provider
Calibrated CPAP and oxygen controls for easy operation
MRI conditional up to 3 T place right next to the scanner with remote alarm output for the control room
Manometer to monitor patient pressure and effort
Built-in CPAP / PEEP system with automatic sensitivity for changing patient needs; no need for external CPAP valves
Night visible pressure gauge for patient monitoring
Monitor CO2 with invasive/non-invasive ventilation
Oxygen powered no batteries to change
Rugged and lightweight (6 lbs / 2.7 kg)
Protection for the caregiver from patient exhalation using the bacteria / viral filter

For Your budget
Two oxygen levels; conserve oxygen with 65% setting
45-minute CPAP run time on a D cylinder
Demand flow CPAP system with minimal wasted oxygen
Economical patient circuits save on operating costs
No batteries or electronics decrease maintenance cost

SPECIFICATIONS
Pneumatically operated for use on pediatric and adult patients > 23 kg
Demand flow system for spontaneous breathing to 140 L/min
Pressures displayed on manometer
Modes of Operation: CMV, IMV, CPAP, Pressure Limit
Mandatory breath flow rate is fixed at 36 L/min
MRI conditional 3 T or less, maximum spatial gradient magnetic field of 720-gauss/cm or less, no gauss line restriction
AUDIBLE AND VISUAL ALARMS
All pneumatic alarm system (no batteries requires minimum 30 psi / 2 bar gas supply pressure)
Low gas source pressure
If source gas drops below 40 psi (2 bar)
Continues operation as long as oxygen is available